XUANBAO HF200A, Руководство пользователя

Страница: 6 / 20

5
4.4 Installment
Following steps:
4.4.1 Elbow B adopt separate package, according to (Fig D) style. At first, put axle
housing of elbow B onto the axle of elbow A. Plus flat washer and lock washer, fix
elbow B with the round opening nuts on elbow A. Adjust the gap of the elbow, put
the lock washer in the nut sunken mouth place, to prevent the nut become less
crowded.
4.4.2 Shut bead breaker shelf and dismount bead breaker spring and cylinder nut,
step foot pedal, start bead breaker, and then cut off electricity and pneumatic supply
of tire changer and open the bead breaker shelf on the right of the tire changer,
install link base (fig C-B), move column to tire changer
4.4.3 According to holes (A and B)in fig C, fix the base of HF200A with bolt
(M10x130) to the link-block (fig C-B). Connect link-shelf by bolt M10x30 with aid
arm and tire changer body (A)separately.
Bolt M10 x 30 (figC-1)
Spacer ring D10 (figC-2)
Nut-S.lock M10 (figC-3)
Bolt M10x130 (fig C-4)
Spacer ring D10 (fig C-5)
Nut-S.lockM10 (figC-6)
“
!
”warning : Make sure HF200A
is upright to the body, and then joint HF200A and body at (fig C-A)(fig C-B)
4.4.4 Bead breaker shelf on the right turn back, install bead breaker spring and