XUANBAO HF200A, Руководство пользователя

Страница: 15 / 20

14
to tire , make color signs match tire inflating entrance.
3) Install round rod to straight arm (fig AD), and adjust the rod to rim away from
1mm, and fix by lock-screw. And move elbow to the rim edge away from 1mm,
which shapes two points to press.(fig AC)
“ ! ” warning :
Protect your hands from presser when operation.
4) Rotate the turntable clockwise, hexangular rod and rod roll in pointed position,
and make the outside tire go into rim..Elbow presser rotates following rim, and
then installment finish.
7.5 Match
Make sure color signs match sensor’s position after outside tire installment. If not,
refer to following steps:
1) Move elbow and hexangular rod to working position.
2) Elbow presser opposites hexangular rod.
3) Keep control rod towards down(fig D-10),press the presser and separate the
outside rim from rim.
“ ! ”warning :
Watch your hands during tire
press.
4) Rotate turntable and make the color signs
of tire match sensor’s position
Note: You may hold rim by hand if necessary.
Don’t forget to lubricate.