XUANBAO HF200A, Руководство пользователя

Страница: 14 / 20

13
If the sensor is attached to tire, be careful
and operate by following steps:
1) Clamp rim from outside only.
2) Move the column to the working zone
and positioning dismounting head.
“ ! ”warning :
Move and position column
only leave HF200A unworked.
3) Lubricate the rim (fig Z)
4) Lubricate edge of rim (fig AA)
5)Put the dismounting head at the right of
sensor.(fig AB)
5) Put inside rim under dismounting head
(fig AB)
6) Rotate turntable clockwise until finishing
installation of the inside rim.
7.4.3 Outside tire installment
1) If the sensor is attached to tire, Put it in
(fig AC) position which opposite
dismounting head.
2) If there are color signs on the tire, make
them suitable for sensor.
“ ! ” warning :
If the sensor is not attached