background image

 

   IMPORTANT SAFETY INSTRUCTIONS 

 

 

INSTALLATION INSTRUCTIONS 

 

 

IMPORTANT 

SAVE FOR LOCAL ELECTRICAL 

INSPECTOR’S USE. READ AND SAVE 

THESE INSTRUCTIONS FOR FUTURE REFERENCE. OBSERVE ALL 
GOVERNING CODES AND ORDINANCES. 

 

 

 

The manufacturer will not be responsible for any damage to 
property or to persons caused by incorrect installation or improper 
use of the appliance.

 

The manufacturer reserves the right to make changes to its

 

products when considered necessary and useful, without affecting the 
essential safety and operating characteristics.

 

 

This appliance has been designed for non-professional, domestic 
use only.

 

 

This appliance shall only be installed by an authorized person and shall 
be  installed  in  accordance  with  the  manufacturers  installation  instruc- 
tions. 

 

IMPORTANT 

This appliance must be installed in accordance with the norms in force  
of the country concerned. The installation of this appliance must con- 
form to local codes and ordinances. In the absence of local codes, In- 
stallations must conforms to American National Standards,  National 
Fuel  Gas Code  ANSI  Z223.1 

–  latest  edition**  or  B149.1.  If  local  codes 

permit, a flexible metal appliance connection with the new AGA or CGA 
certified design, max. 5 feet (1,5 m) long,  1

2” I.D. recommended for 

connecting this cooktop to the gas supply line. 

 

Do not bend or damage the flexible connector when moving the 
cooktop. The  pressure  regulator  has 1

2

”  female  pipe  thread.   You  will 

need to determine the fitting required, depending on the size of  your 
gas supply line, the flexible metal connector and the shutoff valve. 

 

The appliance, when installed, must be electrically grounded in accor - 
dance with local codes or, in the absence of local codes, with the Na- 
tional Electrical Code, ANSI/ NFPA 70. 

 

The appliance and its individual shutoff valve must be disconnected from 
the gas supply piping system any pressure testing of that system at test 
pressure in excess of 1

2 psi (3,5 kPa). 

 

The  appliance  must  be  isolated  from  the  gas  supply  piping  system  by 
closing  its  individual  manual  shutoff  valve  during  any  pressure  testing 
of the gas supply piping system at test pressures equal to or less than 
1

2 psi (3.5 kPa). 

 

For use with a pressure regulator. The regulator supplied must be used 
with this appliance. The gas appliance pressure regulator must be set for 
the gas with which the appliance is used. 

 

WARNING

 

If the  information  in  this manual  is  not followed  exactly,  a  fire 
or  explosion  may  result  causing  property  damage,  personal 
injury or death. 
Do not store or use gasoline or other flammable vapors and 
liquid in the vicinity of this or any other appliance. 

 

WHAT TO DO IF YOU SMELL GAS 

- Do not try to light any appliance. 
- Do not touch any electrical switch. 
- Do not use any phone in your building. 
- Immediately call your gas 

supplier from a neighbor’s phone. 

Follow the gas 

supplier’s instructions. 

- If you cannot reach your gas suppliers, call the fire depart- 
ment. 
Installation and service must be performed by a qualified 
installer, service agency or the gas supplier. 

Содержание XTA-PC30













Отзывы: