Xtreme XR1270 Скачать руководство пользователя страница 59

Страница: 59 / 80

For information call (800) 497-1704

Page 57

XR1270

Operation

The low brake pressure indicator illuminates if the

hydraulic brake oil pressure gets low
If the low brake pressure indicator is illuminated, stop

the forklift, follow proper shut down procedures, tag the

forklift with “Do Not Operate” tags, and have a qualified

mechanic service or repair the forklift BEFORE placing it

into service again

Figure 7-15. Low Brake Pressure Indicator.

The rear axle lock indicator illuminates when the forklift

is in the axle lock mode The rear axle locks when the

parking brake is set to ON (engaged), the transmission is

in NEUTRAL or the service brake applied, and when the

boom is above 40°
If the rear axle lock indicator does not illuminate, stop

the forklift, follow proper shut down procedures, tag the

forklift with “Do Not Operate” tags, and have a qualified

mechanic service or repair the forklift before placing it

into service again

Figure 7-16. Rear Axle Lock Indicator.

Stopping Travel

Stop the forklift by applying the service brake pedal

Downshift the forklift to a lower gear, if necessary, to

slow the forklift until it comes to a complete stop

Move the travel select lever to NEUTRAL (N)

Set the parking brake to ON (engaged)



Warning

To prevent death, serious injury, or

property damage, apply service brakes

until the forklift comes to a complete stop,

move travel select lever to NEUTRAL (N),

set the parking rake switch to ON (engaged), lower

and retract the boom, and shut off the engine before

exiting the forklift.

Changing Travel Direction



Warning

Make sure the forklift comes to a complete

stop before moving the travel select lever.

A sudden change in direction of travel,

while carrying a load, can reduce stability

and/or cause the load to shift or fall, which could result

in death, serious injury, or property damage.

Stop the forklift by applying the service brake

pedal If necessary, shift to a lower gear to help

slow the forklift

Move the travel select lever to FORWARD (F) or

REVERSE (R)

Release the service brake pedal

Slowly press the accelerator pedal to start travel

Shut Down Procedure

Park the forklift on level ground, if possible

Stop the forklift by applying the service brake pedal

Place the travel select lever in NEUTRAL (N) and set

the parking brake to ON (engaged)

Lower the boom and rest carriage on ground

Turn the ignition key to OFF and remove the key

If the forklift is parked on an incline, block the wheels

Содержание XR1270

















































































Результаты поиска

Содержание XR1270

Отзывы:

Xtreme XR1270, Инструкция по эксплуатации и безопасности, Страница: 59 / 80

Результаты поиска

Содержание XR1270

Отзывы: