Xtreme XR1270 Скачать руководство пользователя страница 18

Страница: 18 / 80

Page 16

Xtreme Manufacturing, LLC

Safety

XR1270

Dead Engine Towing

Parking Brake Release (Front Axle)



Warning

Block all four wheels. Failure to do so could result in

death or serious injury from vehicle roll away.

Block all four wheels to prevent the vehicle from

moving once the parking brake is disabled

Position the towing vehicle in place Attach any chain

needed to secure the disabled vehicle

Crawl under the front of the vehicle Locate the four

brake release bolts (two bolts per side) at the base of

the front axle

Loosen jam nuts Loosen brake release bolts Do not

completely remove bolts Tighten 1 full turn if bolts

completely back out (repeat for each side) Tighten

jam nuts

Crawl out from under the vehicle and clear the area of

any unnecessary personnel

Crawl out from under the vehicle and clear the area of

any unnecessary personnel

Carefully remove the blocking from each of the four

wheels and tow the vehicle to a secure location

Re-activating Parking Brakes (Front Axle)



Warning

Block all four wheels. Failure to do so could result in

death or serious injury from vehicle roll away.

After you have blocked all four wheels, crawl under

the front axle

Loosen jam nuts Tighten brake release bolts, until you

begin to feel resistance Tighten jam nuts (repeat for

each side)

The parking brakes should now be re-activated and

the front wheels are locked Remove the blocks from

all four wheels

Verify the parking brake works

Remove any warning tags from the ignition or

steering wheel

Figure 2-1. Brake Release Bolts.

Figure 2-2. Brake Release Bolts (Cab Side).

Figure 2-3. Brake Release Bolts (Tank Side).

Содержание XR1270

















































































Результаты поиска

Содержание XR1270

Отзывы:

Xtreme XR1270, Инструкция по эксплуатации и безопасности, Страница: 18 / 80

Результаты поиска

Содержание XR1270

Отзывы: