Xtreme XR1270 Скачать руководство пользователя страница 11

Страница: 11 / 80

For information call (800) 497-1704

Page 9

XR1270

Safety



Warning

Wear appropriate protective clothing. Personal

protective equipment can include, but is not limited to

hardhat, gloves, footwear, safety glasses or goggles,

and hearing protection. Make sure clothing is snug

and properly belted. DO NOT wear loose clothing,

jewelry, watches, or anything that can catch on forklift

controls, moving parts, etc. Failure to wear the proper

protective clothing could result in death or serious

injury.

Before Starting Forklift



Warning

Keep the Operation and Safety Manual on

the forklift at all times. Contact Xtreme

Manufacturing for replacement manuals.
Clearly define responsibilities and

procedures for operating the forklift and

all attachments. DO NOT proceed until

you seek expert assistance from a qualified

person if any doubt or question arises about the

correct or safe methods for operating the forklift.

To avoid death or serious

injury, carefully read and

understand all instructions

before operating the

forklift. DO NOT operate, modify, repair, or maintain

the forklift unless you read and understand the

instructions and warnings in this and all other

applicable manuals and technical publications. Follow

all State and Federal health and safety laws and/or

local regulations.

Consult Material Safety

Data Sheets (MSDS) for

chemical hazards and first aid

instructions. MSDS should

be available from the manufacturer or supplier of

the fluid.



Warning

Perform a pre-operation inspection and

functional tests at the beginning of each

work shift. Perform the pre-operation

inspection first. DO NOT perform the

pre-operation inspection with the engine running or

hot. Contact with moving or heated parts could cause

death or serious injury.

Perform the pre-operation inspection

and functional tests in an open area.

Inspections and functional tests may

require assistance. Keep the assistant

visible and a safe distance from the forklift to prevent

death or serious injury.

Become familiar with all safety and

hazard labels, regulations, and

procedures. Make sure all proper safety

and hazard labels are attached to the

forklift and remain legible.

A brief description of controls, indicators,

and instruments is provided as a

convenience for the operator. These

descriptions DO NOT provide complete

operation instructions. Read and understand the

entire manual to prevent death, serious injury, or

equipment damage.

Keep fingers and feet away

from moving parts or pinch

points to prevent pinching

or crushing. DO NOT allow

anyone between the tires and the forklift frame while

operating the forklift. Doing so can result in death or

serious injury.

Always check the condition of the seat

belt and mounting hardware before

operating the forklift. If the seat belt or

mounting hardware is defective, it may

not properly restrain the operator, resulting in death

or serious injury.
• DO NOT operate the forklift until the seat belt or

mounting hardware is replaced, if worn or damaged.

• The seat belt MUST be worn while operating the

forklift. Failure to wear the seat belt could result in

death or serious injury.

Содержание XR1270

















































































Результаты поиска

Содержание XR1270

Отзывы:

Похожие инструкции для XR1270

Бренды по названию

Популярные бренды

Xtreme XR1270, Инструкция по эксплуатации и безопасности

Результаты поиска

Содержание XR1270

Отзывы:

Похожие инструкции для XR1270

Бренды по названию

Популярные бренды