Xtreme XR1270 Скачать руководство пользователя страница 41

Страница: 41 / 80

For information call (800) 497-1704

Page 39

XR1270

Operator Cab

Low Brake Pressure Indicator

The low brake pressure indicator illuminates if the

hydraulic brake oil pressure gets low
If the low brake pressure indicator is illuminated, do not

release parking brake or engage transmission until light

is out If light does not go out, stop the forklift, follow

proper shut down procedures, tag the forklift with “Do Not

Operate” tags, and have a qualified mechanic service or

repair the forklift

BEFORE

placing it into service again

Figure 6-21. Low Brake Pressure Indicator.

Rear Axle Lock Indicator

The rear axle lock indicator illuminates when the forklift

is in the axle lock mode The rear axle locks when the

parking brake is set to ON (engaged), or the transmission

is in NEUTRAL or the service brake is applied, and when

the boom is above 40°
If the rear axle lock indicator does not illuminate, stop

the forklift, follow proper shut down procedures, tag the

forklift with “Do Not Operate” tags, and have a qualified

mechanic service or repair the forklift

BEFORE

placing it

into service again

Figure 6-22. Rear Axle Lock Indicator.

Hourmeter

The hourmeter indicates and records engine operating

hours and has a total readout of 9,999 9 hours Use the

hourmeter to establish a forklift maintenance schedule

Figure 6-23. Hourmeter.

Voltage Gauge

The voltage gauge indicates the amount of charge (in

volts) Normal system voltage is between 11 and 15 volts
If the voltage gauge shows abnormal readings, stop the

forklift, follow proper shut down procedures, tag the

forklift with “Do Not Operate” tags, and have a qualified

mechanic service or repair the forklift

BEFORE

placing it

into service again

Figure 6-24. Voltage Gauge.

Содержание XR1270

















































































Результаты поиска

Содержание XR1270

Отзывы:

Похожие инструкции для XR1270

Бренды по названию

Популярные бренды

Xtreme XR1270, Инструкция по эксплуатации и безопасности

Результаты поиска

Содержание XR1270

Отзывы:

Похожие инструкции для XR1270

Бренды по названию

Популярные бренды