Xtreme XR1045 Alden TIER4 Скачать руководство пользователя страница 68

Страница: 68 / 76

Operation Manual

www.XMFG.com

Operation

Figure 105. Frame Sway Control Handle.

The frame sway control handle controls the frame sway (right

and left) functions.
To lock the frame sway, place the travel select lever in

NEUTRAL or apply the service or parking brake.
NOTE: Maximum frame sway is 22° overall or 11° each direc-

tion, left and right.
A frame level indicator is mounted on the inside upper right

corner of the operator’s cab. The frame level indicator allows

the operator to view if the telehandler has been positioned in

a level condition. Always frame sway the telehandler right or

left until the indicator shows 0° (level).

Figure 106. Frame Level Indicator.

Warning

The telehandler includes a Frame Sway Over-

ride switch. Improper use of the Frame Sway

Override switch could cause death, serious

injury, or property damage.

The frame sway feature becomes locked and will not operate

when the boom is raised 40° or more. Applying service brake,

parking brake, and placing travel select lever in NEUTRAL,

then pressing the Frame Sway Override switch (the yellow

button on the front of the control joystick) will override the

lockout feature and allow frame sway.

Figure 107. Frame Sway Override Switch (Yellow).

Boom Maintenance Stand (Optional)

Use the Boom Maintenance Stand to support the boom

anytime during all maintenance activities involving raising

the boom.

Figure 108. Boom Maintenance Stand (Optional)

Содержание XR1045 Alden TIER4













































































Результаты поиска

Содержание XR1045 Alden TIER4

Отзывы:

Похожие инструкции для XR1045 Alden TIER4

Бренды по названию

Популярные бренды

Xtreme XR1045 Alden TIER4, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR1045 Alden TIER4

Отзывы:

Похожие инструкции для XR1045 Alden TIER4

Бренды по названию

Популярные бренды