www.XMFG.com
Operation Manual
41
Operator Cab
Attachment Tilt
The Attachment Tilt switch is located on the top of the
Boom Control Joystick and is used to control attachment tilt
functions.
The Attachment Tilt Switch:
•
Controls the attachment tilt functions by rolling the
switch upward (A) and downward (B).
•
Is a variable speed switch. Function speed is proportional
to how far the switch is rolled. The more the switch is rolled
in the appropriate direction, the faster the corresponding
function will occur.
Attachment Tilt Switch
Intended Action
What To Do
Tilt attachment down Roll tilt switch upward (A - away
from the operator).
Tilt attachment up
Roll tilt switch downward (B - to-
ward the operator).
A
B
C
D
E
F
G
H
Figure 55. Boom Control Joystick Functions 2
The attachment carriage will retain any set angle throughout
boom raising, lowering, retracting, or extending operations.
Notice
Figure 56. Attachment Tilt Switch
FRONT
OF
VEHICLE
A
B
