Xtreme XR1045 Alden TIER4 Скачать руководство пользователя страница 34

Страница: 34 / 76

www.XMFG.com

Operation Manual

Operator Cab

Figure 32. Travel Select Lever

Gear Select Switch

The Gear Select switch has a twist grip handle with the

following positions: 1 - FIRST, 2 - SECOND, 3 - THIRD, and

Automatic.

NOTE:

The forklift can be operated in three (3) forward and

three (3) reverse gears. Automatic should be selected for

normal driving.

Figure 33. Gear Select Switch

Travel Select Lever

The travel select lever has three (3) positions: FORWARD,

NEUTRAL, and REVERSE, which change the direction of travel.

Controls and Indicators

Travel Select Lever

Position

Purpose

F (Forward) UP Position (away from the operator)
N (Neutral)

CENTER Position

R (Reverse)

DOWN Position (toward the operator)

The travel select lever automatically locks when it is in the

NEUTRAL position. The operator must raise and move the

travel select lever when changing to the FORWARD or REVERSE

position.

NOTE:

The travel select lever must be in the NEUTRAL position

to start the forklift.

NOTE:

The back-up alarm automatically sounds when the

travel select lever is in the REVERSE position.

Содержание XR1045 Alden TIER4













































































Результаты поиска

Содержание XR1045 Alden TIER4

Отзывы:

Похожие инструкции для XR1045 Alden TIER4

Бренды по названию

Популярные бренды

Xtreme XR1045 Alden TIER4, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR1045 Alden TIER4

Отзывы:

Похожие инструкции для XR1045 Alden TIER4

Бренды по названию

Популярные бренды