Xtreme XR1045 Alden TIER4 Скачать руководство пользователя страница 59

Страница: 59 / 76

Operation Manual

www.XMFG.com

Operation

Quick Attach System

This telehandler includes a quick attach system that allows for

easy attachment changes. Perform attachment connection

and removal procedures on level ground.

Warning

Improper connection of an auxiliary

attachment can result in death or serious

injury. Attachments not locked into place could

become unstable and fall on the operator or

other personnel near the telehandler, which

could result in death or serious injury.
•

Ensure attachment locking devices are always in place.

•

DO NOT operate the telehandler until you have positive

indication that the carriage attachment is fully engaged.

Attachment Connection

Figure 88. Drive Telehandler Forward to Align Pivot Pins (A) with Attach-

ment Hooks (B)

1. Position the telehandler directly behind the attachment.

NOTE:

Allow enough distance to extend the boom ap-

proximately 18 to 20 inches.

2. Tilt the quick attach adapter forward.

Raise the boom until pivot pins (A) have seated fully in at-

tachment hooks (B).

Tilt the attachment up slightly. The quick attach adapter

should be tight against the rear of the attachment. Align the

holes between the quick attach adapter and attachment.

Figure 89. Raise Boom Until Pivot Pins (A) Are Fully Seated in Attachment

Hooks (B)

Hydraulic attachments have a

maximum hydraulic pressure

rating. Failure to make sure the

attachment is equipped with

a pressure reducing valve, or

is rated to be equal or greater than 3,500 psi, which is the

maximum pressure of the telehandler auxiliary hydraulic

system at the quick-disconnect couplers, could result in

death or serious injury.

Warning

When the auxiliary attachment

control lever is moved right or

left it activates hydraulic pressure

through the quick attach

couplers (A) and (B) to move the

carriage.

Figure 87. Quick Attach Couplers For

Hydraulic Systems.

(A) Female Coupler. (B) Male Coupler.

3. Extend the boom and/or drive the telehandler forward

until the pivot pins (A) are below and between the two (2)

attachment hooks (B).

Содержание XR1045 Alden TIER4













































































Результаты поиска

Содержание XR1045 Alden TIER4

Отзывы:

Похожие инструкции для XR1045 Alden TIER4

Бренды по названию

Популярные бренды

Xtreme XR1045 Alden TIER4, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR1045 Alden TIER4

Отзывы:

Похожие инструкции для XR1045 Alden TIER4

Бренды по названию

Популярные бренды