P. 6
Installation
Guide
12-Pin Accessories Harness
Wire
Description
1
BLUE
(–) AUX 3
(Trunk)
output
500 mA negative output. This output can be used to control Trunk
release (1-sec. pulse) or can be set to operate as a constant output as
long as the
TRUNK
button is held pressed. (For Sunroof or Window
close).
Note:
AUX3
(
TRUNK
)
operates only when Ignition is
OFF
or when the
vehicle is running under remote control.
2
BROWN
(–) Lock
output
Programmable 500 mA, 1/10-sec., 7/10-sec. or 4-sec. negative output.
3
GREEN
(–) Unlock
output
Programmable 500 mA, 1/10-sec., 7/10-sec., 4-sec. or a double ¼-sec.
pulse negative output.
4
WHITE /
BROWN
(–) Arm
output
500 mA ground output when the
LOCK
button is pressed. This output is
activated 500 ms before the
LOCK
pulse and deactivated 250 ms after
the
LOCK
pulse ends.
Note:
The system will also give an
ARM
/
REARM
pulse on this wire when it
shuts down the vehicle after a remote start.
5
WHITE /
GREEN
(–) Disarm
output
500 mA ground output when the
UNLOCK
button is pressed. This wire is
for disarming OEM Alarm systems.
Note:
System will also give a
DISARM
pulse before remote start.
6
BLUE /
WHITE
(-) AUX1
Output
500 mA ground output on the 2
nd
consecutive press of the
UNLOCK
button for Priority Door Access, or a Horn Confirmation on the first or
second press of the
LOCK
button –depending on the option that was
selected in the Programming Menu (see page 12).
7
WHITE /
ORANGE
(–) Starter
Kill output
The unit is equipped with a selectable
passive-
or
active-arming
Starter Kill
circuit that will immobilize the vehicle when the system is
armed. This wire will provide a constant 500-mA negative output when
the system is
armed
(locked by remote) or if remote started. This wire
should be connected to a Single Pole Double-Throw Relay (This wire
will connect to Pin 85, on the Relay, and Pin 86 will be connected to the
Ignition wire).
A second benefit of the Starter Kill is the Anti-Grind feature. When the
vehicle has been remote started the Anti-Grind prevents the starter
motor from re-engaging when the ignition key is inserted in the I
gnition
switch
and accidentally turned to the
CRANK
position (The Starter Kill
output becomes active during remote starts).
8
ORANGE
(–) AUX 2
Output
Negative 500mA output. Can be programmed for one of the following
four options:
(1)
Constant while the
LOCK
and
UNLOCK
buttons are p 1 sec
after release of the buttons.
(2)
LOCK
+
UNLOCK
toggles
ON / OFF
. (Max.30 sec)
(3)
LOCK
+
UNLOCK
toggles
ON / OFF
. (Max.60 sec)
(4)
Priority Door Access
(2
nd
UNLOCK
press)
