Walk-behind floor scrubber -www.xtremepolishingsystems.com
For a quick release of sewage, pull sewage pipes completely straight, as picture (25) shown.
Picture (22) Picture (23) Picture (24) Picture (25)
l
Check the amount of water inside the water tank, clean water tank if necessary. To make
cleaning easier, and completely empty the water inside, we recommend that you loose
and lift the sewage tank.
l
when empty water tank, low water tank and tightly lock on the solution tank top.
l
Cover back and tighten the sewage pipe plug, put the sewage pipe plug back to pipe
holder.
!WARNING
When Clean water tank, please do not take filter net out, either do not use water jet to the
filter net.
At this time,you can restart cleaning work.
6.10 empty water tank
! DANGER
Please wear appropriate personal protective equipment.Disconnect the machine power
before Empty the water tank,
7. PERIODS OF INACTIVITY
If the machine is not used for some time, remove the squeegee and brushes (or drive disks),
wash them and put them away in a dry place (preferably in a bag or wrapped in plastic film)
away from dust. Park the machine with the head lowered.
Make sure the tanks are completely empty and perfectly clean.
Disconnect the machine from the power supply (depending on the model, unplug from the mains
or disconnect the ANDERSON connector from the battery wiring).
Battery models:
Completely recharge the batteries before storing them. During long periods of
inactivity, you should charge the batteries regularly (at least once every two months) to keep
them constantly at maximum charge.
If you do not charge the batteries regularly, they may be irrevocably damaged.
Warning
