Walk-behind floor scrubber -www.xtremepolishingsystems.com
symmetrically. Rotate clockwise to Make 3 columns fast on the brush motor buckle, rotate
stable is ok.(if the machine shakes when running, it means installation not good,please redo),As
the picture (19) shown.
Picture (19)
Use Cleaning pad:stick cleaning pad onto pad driver first,then install pad driver to scrubber
as the way install brush.
Uninstall brush plate(or pad driver):
Step brush plate footboard then shift right, up the brush plate,then touch and start brush
motor.brush plate or pad driver will be loosen automatically and drop to ground.
6.5.
Detergents - Instructions
IMPORTANT
Always dilute the detergent according to the manufacturer's instructions. Do not
use
sodium hypochlorite (bleach) or other oxidants, particularly in strong concentrations.
Do not use solvents or hydrocarbons. The temperature of the water and detergent
must not exceed the maximum indicated in the technical specification. They must be
free of sand and/or other impurities.
The machine has been designed for use with low-foam biodegradable detergents made
specifically for scrubber driers.
For a complete and up-to-date list of the detergents and chemicals available, contact the
Manufacturer: You will be sent the documentation with the "Complete Cleaning System"
manual.
Use products suitable for the floor and dirt to be removed only.
Follow the safety regulations on use of detergents given in the section "Safety regulations".
6.6.
Preparing the machine for work
IMPORTANT
Before starting work, wear overalls, ear protectors, non-slip waterproof shoes, mask to
protect the respiratory tract, gloves and all other personal protection
devices
recommended by the supplier of the detergent used or necessitated by the work
environment.
Before starting work, proceed as follows:
