Xtreme Manufacturing XR630 Скачать руководство пользователя

Страница: 62 / 78

Operation Manual

XR630

Operation

Load Handling

Death or serious injury by electrocution

will result from contact with or inadequate

clearance with energized power lines or

apparatus.

Danger

Keep the Telehandler, attachments, and

loads a safe distance from electrical power

lines.

•

Remain at least 10 feet (3 meters), plus an additional

0.4 inches (10 millimeters) for each 1,000 Volts over

50,000 Volts, from active power lines and other power

sources.

•

Work site operating directives and/or local or state

codes might require a greater distance.

•

Know the maximum height and reach of this Telehan-

dler.

Warning

Failure to follow proper safety procedures

when lifting, lowering, and traveling with

a load could cause death, serious injury, or

property damage.

DO NOT exceed Telehandler capacity of 6,000 pounds

(2,721.5 kilograms). The total rated capacity of the forks be-

ing used must equal to, or exceed, the Telehandler capacity.

Forks can bend or break causing loss of load and could re-

sult in death or serious injury.

DO NOT exceed the manufacturer’s rated load

for any auxiliary attachment. Any attempt to

lift or carry loads in excess of the manufac-

turer’s rated load may cause Telehandler tip

over, loss of load, or structural damage which

could result in death, serious injury, or property damage.

Warning

•

Review the rated load capacity of each auxiliary attach-

ment before performing any operation.

•

Use the correct load chart and NEVER exceed specified

weights and load centers.

•

DO NOT exceed the manufacturer’s recommended load

capacity.

•

DO NOT operate the Telehandler with an unsafe load

distribution.

•

Adjust the load as necessary, especially for nonstan-

dard loads.

•

Use caution when handling loose material that can fall

into the cab.

•

Remove overhanging load materials, when possible,

and watch for sliding material.

•

DO NOT reach a load over posts or other objects that

can enter the cab, if tipped.

•

Avoid sudden stops, starts, or turns.

•

Avoid carrying a swinging load. If necessary, secure the

load by attaching it to the Telehandler tie-downs and/

or have another person assist with safely steadying the

load.

•

Take extreme caution when operating the Telehandler

in an area where active overhead power lines, overhead

or underground cables, or other power sources exist.

•

Contact the appropriate power or utility company to de-

energize power lines or take other suitable precautions.

Failure to keep personnel clear of the load

area while the load is being raised or lowered

could result in death or serious injury. DO

NOT lift, swing, or move a load over anyone.

Содержание XR630















































































Результаты поиска

Содержание XR630

Отзывы:

Похожие инструкции для XR630

Бренды по названию

Популярные бренды

Xtreme Manufacturing XR630, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR630

Отзывы:

Похожие инструкции для XR630

Бренды по названию

Популярные бренды