Xtreme Manufacturing XR630 страница 52 Скачать руководство пользователя

Страница: 52 / 78

Operation Manual

XR630

Operation

2. Turn the Fuel Shut-off valve ON.
3. Use safe mounting/dismounting procedures to enter the

operator cab.

4. Adjust the operator seat for position and comfort. (Refer

to Seat Adjustment section in this manual).

Before Starting Telehandler

Warning

Failure to use proper safety procedures when mounting

and dismounting the Telehandler could result in death or

serious injury.
•

Keep steps clear of dirt, mud, snow, ice, debris, and oth-

er hazards.

Face the Telehandler for mounting or dis-

mounting. Use hand holds and steps to main-

tain three (3) points of contact at all times,

either both hands and one foot or both feet

and one hand.

•

DO NOT use the controls, steering wheel, or foot pedals

as hand holds or steps. Avoid accidentally engaging or

disengaging a control.

DO NOT jump from the Telehandler. Clothing

can get caught on pedals, levers, or other

protruding parts. Landing on uneven surfaces

could result in death or serious personal

injury.

Before starting the Telehandler:
1. Make sure the master battery disconnect is ON.

Fig 71. Travel Select Lever Must Be in NEUTRAL (N) AND Parking Brake

Switch (A) Must Be ON (Engaged) to Start the Telehandler.

Fig 69. Battery Disconnect Switch ON to Start The Telehandler

Fig 70. Fuel Shut-off Valve Must Be ON to Start the Telehandler

5.  Adjust mirrors (this may require assistance).
6.  Fasten seat belt.
7.  Make sure the travel select lever is set to NEUTRAL (N)
8.  The Parking Brake MUST be engaged. Make sure that the

Parking Brake switch (A) is ON (DOWN). The parking brake

indicator (B) illuminates when the parking brake is set to

ON (engaged).

NOTE:

The engine will only start when the travel select lever is

in NEUTRAL (N) and the Parking Brake switch is ON (engaged).

Содержание XR630















































































Результаты поиска

Содержание XR630

Отзывы:

Похожие инструкции для XR630

Бренды по названию

Популярные бренды

Xtreme Manufacturing XR630, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR630

Отзывы:

Похожие инструкции для XR630

Бренды по названию

Популярные бренды