Xtreme Manufacturing XR630 страница 6 Скачать руководство пользователя

Страница: 6 / 78

Operation Manual

XR630

Safety

Xtreme Manufacturing reserves the right to make technical

changes for product improvement. This manual may contain

illustrations and photographs (for demonstration purposes),

which slightly deviate from the actual product.

Safety information provided in this manual is a basic guide

and an attempt to prevent accidents. Xtreme Manufacturing

cannot anticipate every circumstance that might involve a po-

tential hazard. Warnings in this manual and on the Telehan-

dler are NOT all-inclusive.

You are responsible for safe operation of the Telehandler and

all attachments. You must satisfy yourself that the techniques,

operating procedures, work methods, or tools you use are

safe; especially those not specifically mentioned by Xtreme

Manufacturing.

The safety of everyone around the Telehandler depends

significantly on your knowledge and understanding of all

correct and safe operating practices and procedures. You can

help prevent accidents by remaining alert and recognizing

potentially hazardous situations.

Follow State and Federal health and safety rules and/or local

regulations for operating and maintaining the Telehandler.

•

This manual does not replace any laws and regulations.

•

The operator is required to comply with all applicable

laws and regulations.

Signal words are the word or words that call attention to

the safety sign and designate a degree or level of hazard

seriousness. The signal words used in this manual are DANGER,

WARNING, and CAUTION.

DANGER (Red) used with the safety alert symbol indicates

an imminently hazardous situation which, if not avoided,

will result in death or serious injury.

Danger

Signal Words

Safety Disclaimer

CAUTION (Yellow) with the safety alert symbol indicates a

potentially hazardous situation which, if not avoided, could

result in minor or moderate injury.

CAUTION (Yellow) used without the safety alert symbol

indicates a potentially hazardous situation which, if not

avoided, may result in property damage.

Safety symbols are provided to remind the operator of

hazardous situations. Xtreme Manufacturing provides

these symbols in an attempt to inform all operators,

regardless of reading and language skills, of as many

potential hazards as possible. These symbols cover many,

but not all, potential dangers and hazards associated with

operating the Telehandler.

Make safety a high priority while operating the Telehandler.

Learn and follow all safety messages in this manual and

on Telehandler labels to prevent death, serious injury, or

equipment damage. The following two pages include a

list of some of the safety symbols that may be used on this

Telehandler.

Caution

Warning

Safety Symbols

WARNING (Orange) used with the safety alert symbol

indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

Warning

Содержание XR630















































































Результаты поиска

Содержание XR630

Отзывы:

Похожие инструкции для XR630

Бренды по названию

Популярные бренды

Xtreme Manufacturing XR630, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR630

Отзывы:

Похожие инструкции для XR630

Бренды по названию

Популярные бренды