Xtreme Manufacturing XR630 Скачать руководство пользователя

Страница: 14 / 78

Operation Manual

XR630

Safety

DO NOT exit the Telehandler without follow-

ing proper shut down procedures.

Engine fuel is flammable and

can cause a fire or explosion

resulting in death or serious in-

jury. DO NOT smoke while refu-

eling and keep sparks and and

open flames away from the Telehandler.

tag the Telehandler with “Do Not Operate” tags, and have

a qualified mechanic service or repair the Telehandler BE-

FORE placing it into service again. Ignoring warning indica-

tors can result in death, serious injury, or property damage.

Contact with hot surfaces and the exhaust

pipe after the Telehandler has been operated

could result in serious personal injury.

Check warning indicators and gauges on

the display frequently during operation. If a

warning indicator is illuminated or a gauge

shows abnormal readings, stop the Telehan-

dler, follow proper shut down procedures,

Caution

Release the key immediately once the motor starts. If the

motor does not start, DO NOT crank the starter motor con-

tinuously for more than 15 seconds. Failure to release the

key after the motor has started or continuous cranking can

damage the starter motor.

DO NOT change steering modes until the Telehandler comes

to a complete stop. Align all four (4) tires “straight-ahead,” or

perpendicular to the axle, before changing steering mode.

Load Safety

Warning

Failure to follow proper safety procedures

when lifting, lowering, and traveling with a

load could result in death, serious injury, or

property damage.

DO NOT exceed Telehandler capacity of 6,000 pounds

(2,721.5 kilograms). The total rated capacity of the forks be-

ing used must equal or exceed Telehandler capacity. Forks

can bend or break causing loss of load and possible death

or serious injury.

DO NOT exceed the manufacturer’s rated load

for any auxiliary attachment. Any attempt

to lift or carry loads in excess of the manu-

facturer’s rated load may cause Telehandler

tip over, loss of load, or structural damage,

which could result in death or serious injury.

Failure to keep personnel clear of the load

area while the load is being raised or lowered

could result in death or serious injury. DO

NOT lift, swing, or move a load over anyone.

•

Review the rated load capacity of each auxiliary

attachment before performing any operation.

•

Use the correct load chart and NEVER exceed specified

weights and load centers.

•

DO NOT exceed the manufacturer’s recommended load

capacity.

•

DO NOT operate the Telehandler with an unsafe load

distribution.

•

Adjust the load as necessary, especially for nonstan-

dard loads.

•

Use caution when handling loose material that can fall

into the cab.

•

Remove overhanging load materials, when possible,

and watch for sliding material.

•

DO NOT reach a load over posts or other objects that

can enter the cab, if tipped.

•

Avoid sudden stops, starts, or turns.

•

Avoid carrying a swinging load from the boom lift

point. If necessary, secure the load by attaching it to

the Telehandler tie-downs and/or have another person

assist with safely steadying the load.

Содержание XR630















































































Результаты поиска

Содержание XR630

Отзывы:

Похожие инструкции для XR630

Бренды по названию

Популярные бренды

Xtreme Manufacturing XR630, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR630

Отзывы:

Похожие инструкции для XR630

Бренды по названию

Популярные бренды