Xtreme Manufacturing XR630 страница 47 Скачать руководство пользователя

Страница: 47 / 78

Operation Manual

XR630

Operation

Lead-acid batteries produce flammable and potentially ex-

plosive gases. To avoid death or serious injury when check-

ing, testing, or charging batteries:
•

DO NOT use smoking materials near batteries.

•

Keep arcs, sparks, and open flames away from batteries.

•

Provide ventilation for flammable vapors.

•

Wear proper personal protective equipment, including

safety glasses.

Fluid in electric storage batteries contains sulfuric acid,

which is poison and could cause severe chemical burns.

Avoid all contact of fluid with eyes, skin, or clothing. Use

protective gear when handling batteries. DO NOT tip a bat-

tery beyond a 45° angle in any direction.
If contact does occur, follow these First Aid suggestions:
•

External contact - Flush with water.

•

Eyes - Flush with water (including under the eyelids)

for at least 15 minutes and get medical attention

immediately. Flushing must begin immediately to

avoid permanent eye tissue damage.

•

Internal contact - Drink large quantities of water or milk

to dilute stomach contents. Do not induce vomiting.

Get medical attention immediately.

IMPORTANT - In case of internal contact, DO NOT give fluids

that induce vomiting.

Warning

Battery posts, terminals, and related

accessories contain lead and lead

compounds, chemicals known to the State

of California to cause cancer, birth defects, or

other reproductive harm. Wash hands after

Warning

handling these items.

California Proposition 65

Warning

Wear eye protection when starting a Telehan-

dler with jump start cables. Improper jump

start procedures could cause the battery to

explode, which could result in death or seri-

ous injury.

•

Never jump start a frozen battery, as it can explode. Let

the battery thaw out before charging.

•

NEVER jump start the Telehandler when travel select le-

ver is in gear, which can cause the Telehandler to lurch

forward or backward, and could result in death, serious

injury, or property damage.

•

To avoid injury or death when jump starting with an-

other Telehandler, make sure the two (2) Telehandlers

are not touching.

•

DO NOT allow jump start cable ends to contact each

other.

•

Connect charged battery positive (+) to stalled battery

positive (+).

•

Connect charged battery negative (–) to stalled Tele-

handler ground. Make the connection to the stalled

Telehandler ground last.

•

Connect jump start cable to stalled Telehandler ground

a safe distance from the battery to prevent sparks near

the battery.

•

Jump start only with a power source with the same volt-

age as the stalled Telehandler.

•

Turn off all lights and accessories on the stalled Tele-

handler to prevent them from operating when the pow-

er source is connected.

•

Electrolyte contains acid and could cause serious

personal injury if it contacts the skin or eyes.

Caution

Use caution when operating the forklift

during storms or strong winds.

Содержание XR630















































































Результаты поиска

Содержание XR630

Отзывы:

Похожие инструкции для XR630

Бренды по названию

Популярные бренды

Xtreme Manufacturing XR630, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR630

Отзывы:

Похожие инструкции для XR630

Бренды по названию

Популярные бренды