VIS-IR Thermography Detector Product Guide
Xtralis
36218_A2
17
7 Software Installation
The ViSM software provides real time temperature information of all monitored areas, giving alarms, pre-
alarms and fault notifications in every created area in the software. Once an alarm or fault is detected, it will
generate a relay output which can activate any fire protection device connected to the FTD system.
The application will run when launching the shortcut on the desktop of the PC.
The software installation must be carried out on a computer that meets at least the following specifications:
•
Windows 10 OS
•
Intel i7 processor
•
8GB RAM
•
5GB HDD
•
Gigabit Ethernet network card
•
Mouse, keyboard and display monitor
Please install the ViSM software using the supplied set-up files. Administrator rights are required on your PC
to install the different executables.
The installation wizards will guide you and create a launch icon for the ViSM on the desktop.
Important Note!
After connecting the detector with the software and initiating the detector, it is
necessary to wait approximately 15-20 minutes for the internal detector
temperature stabilization; to get a correct temperature measurement.
