6. FUNCTIONAL DESCRIPTION
WORK MODE ADJUSTMENT
The selector ring (
2
) is used to switch between DRIVING and DRILLING operations. The arrow on
the top of the device shows which of the given work modes is currently set.
TORQUE ADJUSTMENT
The selector ring (
2
) is also used for adjustment of the torque value when tightening and loosening
screws. Option to set values in positions 1-25.
SPEED ADJUSTMENT
The speed adjustment switch (
3
) is used to change the rotation speed setting by choosing
between two values (1 or 2). The visible value applies to the current set.
DIRECTION OF ROTATION SWITCH
The direction of rotation switch (
5
) is used to set the direction of rotation of the chuck to the left or
right as well as to lock the main trigger.
WORK LED LIGHT
The LED light (
7
) is located on the lower part of the device directly under the handle and is used
for better illumination of the work area.
TRIGGER
The main trigger (
4
) is the basic control element of the device and is used to regulate the speed of
rotation continuously.
CHUCK
The chuck (
1
) and its internal jaws are used
for clamping work tools and attachments.
HANDLE
An ergonomic, rubberized handle (
6
) serves
for a firm grip on the device.
BUCKLE
The hanging clip (
10
) located on the side of
the drill is used for hanging the tool on the
belt.
VENTILATION SLOTS
The ventilation slots (
11
) on the side of the
device are used for proper cooling of the
motor.
Содержание XT102705
