manualshive.com logo in svg

Xterra SB550, Руководство пользователя, Страница: 22 / 24

Поделиться
Скачать
Xterra SB550 Скачать руководство пользователя страница 22

20

SB

550

 Fitness Bike

The console has built in maintenance/diagnostic software. The software will allow you to make changes to the 

console settings such as changing units from English to Metric or turning off the console beeps (if they are wak

-

ing your family during your early morning workouts). To enter the Maintenance Menu (may be called Engineering 

Mode, depending on version) press and hold down the 

Start

, 

Stop

 and 

Enter

 keys. Keep holding the keys down 

for about five seconds and the message window will display “Engineering Mode”. Press the 

Enter

 key to access 

the menu below. Press the 

Resistance

 

Up/Down

 keys to navigate the menu. 

a.  Key Test - Allows you to test all the keys to make sure they are functioning

b.  LCD Test - Tests all of the display functions

c.  Functions - Press 

Enter

 to access settings, use 

Resistance

 

Up/Down

 keys to navigate.

i. 

Sleep Mode - On; when turned on the console will darken after 30 minutes of no use. When turned off 

the console will remain lit as long as the power is on

ii.  Motor Test - Continually runs the tensioning gear motor

iii.  Manual - Allows stepping of the gear motor

iv.  TYPE SET - Set to Bike or Elliptical

v. 

Key Tone - Turns on/off the key press beeping tones

vi.  Units - Set to English or Metric display readings

vii.  Odometer Reset - Reset the odometer 

viii. 

Pause mode – On; when turned off, pressing 

Stop

 once ends the program; when turned on, the  

console retains data for five minutes before switching to the startup screen

ix. 

Safety – Off; when turned on the machine automatically goes to 

Level

 20 of Resistance to prevent 

unauthorized use by a child

d.  Security - Allows you to lock the keypad so no unauthorized use is allowed. When the child lock is enabled, 

the console will not allow the keypad to operate unless you press and hold the 

Start

 and 

Enter

 keys for 

three seconds to unlock the console.

e.  Factory Set 

f.  Exit – press 

Enter

 to return to the startup screen

General Maintenance

Engineering Mode

1.  Wipe down all areas in the sweat path with a damp cloth after each workout.

2.  If a thump, clicking or wobbly feeling develops, the main cause is usually the pedals and/or crank arms  

being loose.

Содержание SB550

























Отзывы:

Нет отзывов