SB
550
Fitness Bike
9
#70
. 5/16” x 18mm
Flat Washer (4 pcs)
#71
. 3/8” x 19mm
Flat Washer (6 pcs)
#95
. 5/16” x 3/4”
Button Head Socket
Bolt (6 pcs)
#101
. 3/8” x 3/4”
Hex Head Bolt (6 pcs)
#102
. 5/16” x 19mm
Curved Washer (2 pcs)
3
Hardware Step 3
1. Secure the Seat Back Assembly (
5
) to the Seat Carriage with six Hex
Head Bolts (
101
) and Flat Washers (
71
). Make sure these bolts are very
tight.
2. Run the two wires (
107
&
109
) through the bottom of the Console Mast
and out the hole at the top. Slide the Console Mast into the mating tube;
pull slightly on the two wires while you install the Console Mast so they
do not get pinched. Secure the mast with six Button Head Socket Bolts
(
95
), four Flat Washers (
70
) on the side bolts and two Curved Washers
(
102
) on the two front bolts. Make sure to start all six bolts first before
tightening all the way.
Console Mast & Seat Back
