10
SB
550
Fitness Bike
#70
. 5/16” x 18mm
Flat Washer (4 pcs)
#73
. 5/16”
Split Washer (4 pcs)
#95
. 5/16” x 3/4”
Button Head Socket
Bolt (4 pcs)
#81
. M5 x 12mm
Phillips Head Screw
(4 pcs)
4
Hardware Step 4
1. Install the Mast Handlebar Assembly (
3L
,
3R
) and secure with four
Button Head Socket Bolts (
95
), Split Washers (
73
) and Flat Washers
(
70
) by using the Allen Wrench (
106
).
2. Connect the two wires (
107
&
109
) to the mating connectors on the back
of the Console Assembly (
94
) and secure the console with four Phillips
Head Screws (
81
) by using Phillips Head Screw Driver (
105
). Be careful
not to pinch the wires between the console and mounting plate.
3. Install the two pedals onto the crank arms. The left pedal (
35
) is a
reverse thread so as you turn the pedal bolt into the crank arm turn it
counter-clockwise as if you are loosening it. The right side pedal (
36
) is a
normal thread so tighten it clockwise. Make sure the pedals are as tight
as you can possibly get them. It may be necessary to re-tighten them
again after a few hours of use.
Console, Handle Bars & Pedals
