Xterra 16468201US Скачать руководство пользователя страница 27

Страница: 27 / 32

Customer Service 1-888-707-1880
or email [email protected] Dyaco Canada Inc. ©2014

TROUBLE SHOOTING

Problem Cause Correction

Monitor does not display

Adaptor not plugged in

Plug adaptor in

Computer wires not connected

Ensure the computer wires are
connected properly at the
upright and the computer

No speed or distance
displays on the monitor

Sensor wire not connected

Ensure the computer wires are
connected properly at the
upright and the computer

Sensor wire not working properly

Replace sensor wire

Monitor not working properly

Replace monitor

No tension

Magnetic wheel not working
properly

Replace magnetic wheel

Computer wires not connected
properly

Ensure the computer wires are
connected properly at the
upright and the computer

Heart rate not displaying

Pulse wire not connected

Securely plug wires together

Hand pulse defective

Replace hand pulse grip

Monitor not working properly

Replace monitor

Grinding noise

Crank bearing defective

Replace crank bearings

Idler pulley defective

Replace idler pulley

Flywheel defective

Replace Flywheel

Squealing

V-belt slipping

Adjust v-belt

E1 Monitor cannot read
the signal change (level
change or level change
cannot reach target
position) from the gear
motor.

monitor has problem

Replace monitor

The connection cables from monitor
to gear motor are damaged or
disconnected. Pins of the connector
are bent or not fix well.

Check all computer plugs and

wires are connected firmly.

Gear Motor damage or circuit on
the gear motor is abnormal.

Replace gear motor

Wire cable from gear motor to
magnetic system is too short to
drive the magnetic system or
position is not correct.

Adjust the length of motor wire
to make sure there are enough
space to drive the motor.

E2 The computer
cannot interface with the
IC chip.

EEPROM has problem (EEPROM
is installed incorrect)

Replace monitor.

The gear motor cannot read the
signal change from the level one
within 4 seconds after press the
start button.

Replace gear motor

Maintenance

The safety of this produce can be maintained only if regular periodic checks are made. Most checks can

be performed once a week. However some checks should be made before each workout, and are

indicated as such below.

Содержание 16468201US

































Результаты поиска

Содержание 16468201US

Отзывы:

Похожие инструкции для 16468201US

Бренды по названию

Популярные бренды

Xterra 16468201US, Руководство пользователя

Результаты поиска

Содержание 16468201US

Отзывы:

Похожие инструкции для 16468201US

Бренды по названию

Популярные бренды