Customer Service 1-888-707-1880
or email [email protected] Dyaco Canada Inc. ©2014
20
MAINTENANCE
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the reed switch should be adjusted. To adjust
the reed switch, the chain cover (56) must first be removed.
Remove the right pedal (36) from the crank (17).
Remove the two self-tapping screws (54) from each side of chain cover (56). Remove another
seven ST5 x 15 self-tapping screws (53) from right chain cover (56R). Remove the crank cover
(55) from the chain cover (56). Hold the chain cover (56) near the back and pull it apart slightly
until the chain cover can be lifted off the ends of the crank (17).
Do not pull the chain cover
apart at the top or the seam may be broken.
17
36
54
54
53
37
56L
53
53
53
55
56R
Next, locate the sensor wire (84). Turn the pulley until the magnet is aligned with the reed switch.
Loosen, but do not remove, the ST5 x 15 screw (53). Slide the reed switch slightly toward or
away from the magnet. Make sure that the magnet will not hit the reed switch. Retighten the
screw (53). Turn the pulley for a moment. Repeat until the console displays correct feedback.
53
84
85
When the Reed Switch is correctly adjusted, reattach the Chain Cover and the Crank Covers.
