Customer Service 1-888-707-1880
or email [email protected] Dyaco Canada Inc. ©2014
7
ASSEMBLY INSTRUCTION
This manual is designed to help you easily assemble, adjust and use this machine. Please read this
manual carefully. For the sake of familiarizing yourself with the parts identified in the instruction, first study
the overview drawing.
Set all parts in a clear area on the floor and remove the packing material. Refer to the parts list for help to
identify the parts.
It will take two people to assemble your unit.
Note: If a part is not in the hardware kit, check to see if it has been preassembled. To avoid
damaging parts, do not use power tools for assembly.
STEP 1
Attach the front stabilizer (3) to the main frame (1), securing with two allen screws (2), two spring
washers (4) and two curved washers (5).
2
3
4
5
1
STEP 2
Connect middle extension hand pulse wire (33) with rear extension hand pulse wire (34). Attach
support tube (40) to main frame (1), and tighten with 6 sets of allen screw (21) and flat washer (38).
Attach the leveling pad (39) to the bottom of main frame (1).
Attach rear stabilizer (6) to the support tube (40) and tighten with 2 sets of carriage bolt (23), curved
washer (24) and domed nut (31).
Tip: Avoid pinching the Extension Wires
1
21
21
21 38
38
38
39
40
6
23
24
31
34
33
