21
8.7.
Debug Tools > Monitor Property command
This command is designed to get the property of the Monitor. Follow the steps in next page:
In
Debug State
, press “2”,”#” to
enter
Debug Tools
, select “6”
Input Monitor’s Room Code in
4-digits, and then press “#”
The properties of Monitor
are shown on screen.
8.8.
Debug Tools > Voltage Measuring command
This command is used to get Monitor’s voltage values, and execution time is about 1 second.
Two values are returned: Standby voltage when Monitor screen turns off; working voltage when Monitor
screen turns on. Please note SR serial Monitors were designed without A/D converter, and don’t support.
In
Debug State
, press “2”,”#” to
enter
Debug Tools
, select “7”
Input Monitor’s Room Code in
4-digits, and then press “#”
The two voltage values
are shown on screen.
8.9.
Debug Tools > Simulate Calling command
This command simulates the “Door Station calls Monitor” operation in background process, without
bothering the owners or tenants. As most of the calling signals are processed in Simulating Calling, if a
Monitor passes the test, generally this Monitor should works well.
Please note the Monitor will be turned on 3 seconds and then shut down during Simulate Calling.
In
Debug State
, press “2”,”#” to
enter
Debug Tools
, select “8”
Input start and end Room Code
range, then press “#” to run
The result is displayed.
Содержание DPC-536
Страница 9: ...5 3 PROGRAM MENU Overview 9...
