XtendLan DPC-536, Руководство по программированию и отладке

Страница: 14 / 21

14
6.2. How to enter Unlock Setting menu
If Door Station runs as Debug State, you can press “#” twice to activate Program Menu, then select “2” to enter;
However, if runs as Normal State, follow these steps to enter:
[ 2 ] U n l o c k S e t t i n g
- - - - - - - - - - - - - - - - - - - - - - - - - - -
> > [ 2 ] [ 1 ]
- 1 . U n l o c k C o d e 1 [ 1 1 1 1 ]
- 2 . U n l o c k C o d e 2 [ 2 2 2 2 ]
- 3 . C o d e E r r o r A l e r t [ 0 ]
- 4 . C o d e M o d e [ 1 ]
- 5 . C o d e R a n g e . . .
- 6 . C o d e C h e c k . . .
- 7 . C o d e N b r s [ 0 ]
- 8 . C h a n g e P r o g r a m C o d e
U n l o c k C o d e 1
- - - -
( * * * * )
- - - - - - - - - - - - - - - - - - - - - - - - - - -
P r e s s 1 ~ 9 t o s e l e c t . . .
* B a c k
* B a c k # S a v e
V i d e o E n t r y S y s t e m
V i d e o E n t r y S y s t e m
Press “#”, then Input “ 8002 ”, then
Program Code (or Admin Code )
Press number 1 , to enter
Unlock Code1 item
Input 4 digits, then press
“#” to update
6.3. Description of Unlock Code management
Items Descriptions Factory setting
-1. Unlock Code 1 To change 1st unlock code in Common Code Unlock mode, in
4-digits format. It is default code for Private Code Unlock mode.
[1111]
-2. Unlock Code 2 To change 2nd unlock code in Common Code Unlock mode.
[2222]
-3. Code Err Alert If set to 1, when wrong codes were input for 3 times within 1
minute, warning message will be sent to Guard Unit, and unlock
function is forbidden within 3 minutes. If setup 0, no warning.
[0]
No warning
-4. Code Mode If set to 1, works as Common Code Unlock mode, and using 1st
and 2nd unlock code. If set to 0, works as Private Code Unlock
mode, each unit has its own unlock code respectively.
[0]
Common Code
Unlock mode
-5. Code Range Only used in Private Code Unlock mode, to set the valid range
of Room Codes. Room Code out of limit range is invalid.
[0101~0808]
-6. Code Check Only used in Private Code Unlock mode. If set to 1, the Monitor
of the input Room Code must be online; If set to 0, no limit.
[0]
No limit
-7. Code Nbrs Only used in Common Code Unlock mode. If set to 1, the unlock
code is set to 8 digits, which is the combination of 1st and 2nd
unlock code. If set to 0, unlock code is 4 digits, both 1st and 2nd
unlock code are valid.
[0]
4-digits code
-8. Program Code To change the Program Code. [88888888]