background image

Introduction

The DP100 is a 2 input 4 output assignable audio delay featuring 3 band parametric

equalisation for each output, 11 micro-second minimum delay increment,  80 memories,

excellent dynamic range and compensation function for ambient temperature change.

XTA's proprietary 

AudioCore

 digital signal processing technology is the heart of the DP100

providing a more flexible solution to audio delay requirements

 and 

system engineering.

With analogue and digital inputs and outputs, plus optical I/O option, the DP100 will integrate

into both current and future systems.  This flexibility extends to the external control options,

where a choice of MIDI or open architecture port is provided. Engineered for flexibility and

performance, built for reliability - the DP100 sets the standard in professional audio delay.

Features

A flexible 3 band parametric equaliser is provided for each output.  Each section
provides up to ±15dB of gain at any centre frequency 20Hz - 20kHz with a wide range
of Q's.

Comprehensive standard specification includes 80 memories, MIDI for external control
& linking master / slave units, selectable operating level and security lock-out function.

Delay measurement mode simplifies set-up by allowing delay time for the sound system
to be calculated.

2 inputs and 4 fully assignable outputs allow the DP100 to be configured for almost any
application.

Operating modes comprise:

 Mono

 1 in / 4 out, 

Dual

 2 in / 4 out ,

 Stereo 

(linked) 2 in / 4

out and

 Split 

1 in / 1 out + 1 in / 3 out.

The DP100 provides exceptional audio quality with a full 103dB dynamic range, high
sampling rate and minimal filtering.

Wide range digital control of level is provided for each output. This also allows 

mute

 to

be applied to any output. 

Display is selectable between units of time, distance or video frames and a base delay
can be added before all outputs allowing relative adjustments.

11 µS minimum delay increment for critical driver alignment applications.

Maximum standard delay is 1.365 Secs. per output (

dual

) and 2.73 Secs. (

mono

). This

is expandable up to  8.19 Secs (

dual

), 16.38 Secs (

mono

)  to special order.

AES / EBU digital inputs and outputs are available as an option, with optical I/O also
available to special order.

DP100 Page 2

Содержание DP100





















Отзывы: