XS Scuba Inspire Regulator, Руководство по обслуживанию

Страница: 17 / 38

17
www.XSscuba.com
XS Scuba Inspire Regulator Service Manual
ii. Inspect the lever (19) to ensure that
the two legs are parallel and that the
two engagement feet are on the same
plane. If the legs of the lever (19) are
spread, squeeze them together until
they are parallel.
E. Remove the external o-ring from the air barrel.
F. Remove the crown orifice from the air barrel
A. Use the back end of the TL136 Multi-Pur-
pose tool to push the orifice (13) out of the
valve housing (17). If it doesn’t move, it is
possible that it may still have some thread
engagement (see step 7a).
iv. Remove the o-ring (14) from the crown
orifice (13).
8. Separate the Poppet Assembly
A. Separate the balance chamber (24), the spring
(23) and the poppet (21).
B. Disassemble the poppet
i. Using a fingernail if possible, remove the
two small o-rings (22) from the tail of the
poppet (21).
7D
7E
7F
7F
8A