21
1
1..
Mount the wheels on the wheel axle hex
hubs using #309310 (SH M4x8) screws
and #309310 (ST 4x12) cone washers.
Note the orientation of the cone washer in
the detail image.
M
Maakkee ssuurree tthhee w
whheeeell ssccrreew
wss aarree vveerryy ttiigghhtt,,
ssoo tthhee w
whheeeellss ddoo nnoott lloooosseenn dduurriinngg rraacciinngg..
2
2..
Mount four #306109 battery posts to the
chassis with #309343 (SH M3x6) screws.
This car is designed to use a 4-cell battery
pack.
3
3..
Remove the clips from the front
of the battery mounting posts,
and pivot the battery straps open.
4
4..
Position the battery pack
in the chassis cutouts.
5
5..
Reposition the battery straps over the
batteries, and secure to the front battery
mounting postswith the clips.
The XRAY T1 Mini is a competition racecar, and therefore does not come
supplied with tires and inserts. Check with racers at tracks you attend to
determine the best tire/insert combinations.
Use your own tires and inserts to prepare the wheels:
1
1..
Install a foam insert into each tire, making sure it is centered.
2
2..
Slide the tire (with insert) onto the wheel.
3
3..
Carefully glue the tires to the wheels with CA glue.
W
Wa
arrn
niin
ng
g:: FFo
ollllo
ow
w tth
hee a
ad
dh
heessiivvee m
ma
an
nu
uffa
accttu
urreerr''ss iin
nssttrru
uccttiio
on
nss ffo
orr
p
prro
op
peerr u
ussee a
an
nd
d ssa
affeettyy.. W
Weea
arr p
prro
op
peerr eeyyee a
an
nd
d h
ha
an
nd
d p
prro
otteeccttiio
on
n..
309310
SH M4x8
309310
ST 4x12
309343
SH M3x6
➊
➊
➊
➋
➍
➋
➌
CA GLUE
ACCESSORY ASSEMBLY
TIRES AND INSERTS
NOT INCLUDED
DETAIL
➋
