User Manual
XProHeli DYS 3XBrushless Gimbal
DYS 3X Brushless Gimbal For GoPro
Page 25
©2014 XPROHELI. All Rights Reserved.
Setup for 2
nd
Operator / Tilt Control
Connecting a RC system to the DYS 3X is optional for
pitch/roll/tilt control. Operation with a 2
nd
operator
using a RC system will allow control and aiming of the
gimbal independently from the direct physical
movements of the gimbal unit.
Several different RC protocols including standard PWM,
Sum-PWM and Futaba S-Bus are supported. Setup for
each of these control systems is slightly different in the
software (for Futaba and Sum-PWM refer to online
Basecam Manual for proper setup).
Typical 2
nd
operator setup using Normal PWM receiver:
Tilt (RC_PITCH)
Roll (RC_ROLL)
Signal
+5 V
Gnd
