User Manual
XProHeli DYS 3XBrushless Gimbal
DYS 3X Brushless Gimbal For GoPro
Page 6
©2014 XPROHELI. All Rights Reserved.
Mounting Your GoPro
Overview
The DYS 3X comes with a machined retaining lens housing to
secure the GoPro to the camera tray of the gimbal:
Install the camera onto the gimbal by using the (2) small 1.5mm
allen screws and 1.5mm allen key. These screw into the back of the
retaining ring, one on the top and one on the bottom:
Screw in bottom:
Should look like this when mounted properly:
Quick Tip!
For best
performance
always make sure
you adjust the Roll
plate for balance
when changing to
different GoPro
configurations!
