XF4500 Cleaning Configuration Part Two
Attach cleaning hoses as pictured above. Tubing and connectors are supplied in the power cord bag.
1.
Turn on main power switch with bottles in place. (Green switch located right side)
2.
Push in to close quick release knobs.
3.
With gas line on turn on spout switch and allow gas to flow through the filling system.
4.
Turn spout switch to middle position, and then back up to full on position. Repeat this several
times to allow the purge path to ventilate completely.
5.
Turn the release pressure knob at top of machine clockwise to close valve about half way,
approximately ten turns.
6.
Pull open the quick release knob for maximum ventilation through that flow path.
7.
When you are satisfied with the results turn off the spout switch and remove the bottles.
8.
Turn off the air/gas supply and remove all the hoses.
9.
Turn off the machine.
