XPRESSFILL Systems LLC
|
9
265 Prado Road, Suite 1 • San Luis Obispo, CA 93401 • Tel: (805) 541-0100 • [email protected]
6
Cleaning
Cleaning your XpressFill is quick and easy, and is the single most important maintenance you can
administer to ensure long life and solid performance from your fi ller. Please use extreme caution
when using any cleaning product.
For general cleaning, we highly recommend a product called PBW by Five Star Chemicals. It
is safe, fast, and eff ective, and our customers have been happy with the results. To clean your
XpressFill, begin by fl ushing your fi ller with 2 gallons of plain warm (not boiling) water from a
pressurized keg, which is pressurized with air. Follow that with a 3-gallon mix of PBW cleaner,
and let the PBW sit inside your fi ller for a few minutes in order to do its cleaning job. Follow the
cleaning with a sanitizer.
For sanitizing, we recommend Saniclean, from the same manufacturer. Saniclean has low-
foaming characteristics, is highly eff ective, and completely food grade if diluted correctly per the
manufacturer’s instructions. Use the sanitizer with about 3 gallons of water, and follow the steps
according to the manufacturer’s instructions. After sanitizing, fl ush your fi ller with 2 gallons of
warm water. Before storing your XpressFill fi ller, make sure you get all water out of the fl ow path.
Allow to run until pressurized keg with cleaning solution is empty and runs dry, blowing the
remaining water out of the fi ller vent.
See instructions on the following page.
1
2
3
4
5 6
7
8
