https://www.XPOtool.com
Item 63369
Page 8
The Tool Experts
09 2022-1
Step
9
1.
Put the fixed foot
(4)
into the connections of the tank bottom near the border.
2.
Use the last splint
(3)
to fix the foot to the tank.
1 = table
Step
10
Before beginning any word, re-check all connections to make sure that they are tight and correctly made.
Other instructions
Before opening the tank, release the pressure. Shut the air valve
(18),
open the shut-off valve
(18C),
and release the pressure inside the line. Make sure that the gauge
(15)
shows zero pressure, then open
the tank.
Maintain the correct air pressure. The pressure should not exceed 8.6
bar (125
psi). If it does, the safety
valve
(10)
should release the over-pressure. If the safety pressure is not capable to do so, immediately
interrupt your work and, with the use of your air compressor, relieve the pressure. Only search for the
pressure problem of the sandblaster after the gauge
(15)
shows zero pressure.
E
F
C
D
B
A
