https://www.XPOtool.com
Item 63369
Page 7
The Tool Experts
09 2022-1
Step
5 – assembly of the nozzle shut-off valve
(18C)
To perform this step, choose one of the four nozzles
(27).
This choice is not definite, you will be able to
replace the nozzle depending on the work to be done.
1.
Screw the adaptor
(25)
into the shut-off valve
(18C).
2.
Screw the last fitting connection
(16)
on the other side of the valve.
3.
Screw the gasket
(26)
into the fitting connection
(16),
then add a nozzle
(27)
and union nut
(28).
Step
6 – connecting the sand outlet unit (step
4) and shut-off valve unit (step
5)
1 = tank | 2 = nozzle unit
1.
Slide a hose clamp
(23)
on either end of the sand hose
(24).
2.
Press one end of the hose on the sand outlet tube connection
(22)
and the other end on the
adaptor
(25).
Both ends of the tube must be seated firmly onto the connections.
3.
Slide the hose clamps
(23)
along the hose up to each of the connection.
4.
Tighten the clamps very well.
Step
7
Fix the both handlebars
(6)
to the tank with the help of four flat headed screws
(8)
and four hexagon
bolts
(9).
Make sure that the ends of the handlebars are bent upwards.
Step
8
1.
The axle
(5)
is pushed through the holes on the side of the handlebars
(6).
2.
Place one wheel
(2)
on either end of the axle
(5),
then fix both wheels with the help of the
splints
(3).
C
