XM1630S Software Reference Manual
No. XM1630S-A00-104
xmodus swiss GmbH
19 / 32
4.4 Description of commands
4.4.1 LAN configuration commands
set_dhcp:
set_dhcp enable
= enables DHCP Protocol
set_dhcp disable
= disables DHCP Protocol
Note: Before enable the DHCP protocol set IP Address to: 0.0.0.0
set_ip_add:
set_ip_add xxx.xxx.xxx.xxx
= sets the IP address
Example: set_ip_add 192.168.0.1 <cr>
set_ip_mask:
set_ip_mask xxx.xxx.xxx.xxx
= sets the IP subnet mask
Example: set_ip_mask 255.255.255.0 <cr>
set_ip_gway:
set_ip_gway xxx.xxx.xxx.xxx
= sets the Gateway address
Example: set_ip_gway 192.168.0.20 <cr>
set_eth_speed:
set_eth_speed 10
= sets the Ethernet speed to 10Mbit/s
set_eth_speed 100
= sets the Ethernet speed to 100Mbit/s
set_eth_speed AUTO
= sets the Ethernet speed to auto detection
Example: set_eth_speed AUTO <cr>
show_config:
show_config
= show the actual configuration
show_config_o
= show the default network configuration
save:
save
=
save
actual
configuration
