XMODUS XM1630S, Руководство по программному обеспечению

Страница: 15 / 32

XM1630S Software Reference Manual
No. XM1630S-A00-104 xmodus swiss GmbH 15 / 32
4.2 Summary of commands
LAN CONFIGURATION CONFIGURE INPUT/OUTPUT
set_dhcp <enable/disable> DHCP set_user Set output mode of I/O ports
set_ip_add Set IP address get_user Get output mode of I/O ports
set_ip_mask Set IP mask set_ddr Set port type [i,o] of I/O ports
set_ip_gway Set the gateway get_ddr Get data direction of I/O ports
set_eth_speed Set LAN speed (10/100/AUTO) read_port Read status of I/O ports
show_config Show network configuration write_port Set status of I/O ports
show_config_o Show original network config. read_adc Read ADC input value
save Save configuration
validate Validate configuration
ping Ping IP address
arp a Request ARP table ADMINISTRATION MENU
arp –d Delete ARP table set_pass Define user name and password
help Display menu help set_id Define ID name
quit Leave command mode reject Reset non saved changes
restore Restore factory default
CONFIGURE SERIAL INTERFACE reset Reset non-saved setting
set_baud Set serial baud rate download Download new firmware
set_stop Set stop bits (1/1.5/2)
set_bits Set data bits (7/8)
set_par Set parity (EVEN/ODD/NONE) CONFIGURE SECURITY
set_flow Set flow control (XON/HW/None) set_ftp Enable FTP Server
set_high water Set flow stall [1..99%] set_telnet Enable Telnet Server
set_low_water Set flow restart [1..99%] set_web Enable HTTP (web) Server
set_buf_size Set serial input buffer set_web_auth Enable web authorization
set_buf_delay Set serial input buffer delay set_telnet_port Define Telnet port
set_trusted_ip Define trusted IP address
show_config Show configuration
CONFIGURE SERIAL/TCP COMUNICATION
set_raw _socket Defines Telnet / RAW modes
set_iax_rx Enable IAR Rx filtering AT COMMANDS
set_iac_tx Enable IAC Rx filtering AT Standard AT command
set_socket_tout Set Telnet session timeout ATD Dial out to IP address
set_dialin Enable dial-in (incoming call)
ATO N MENU
Resume data session
set_dialin_port Def. dial-in port (incoming call) ATH Terminate connection
set_esc
Enable escape to command
mod.
go AT Go to AT command mode
set_dialin Enable dial-in (incoming call)
set_dialout Enable dial-out (outgoing call)
set_dialout_port Def. dial-out port (outgoing call)
set_dialout_ip Default IP address. for dial-out up Go to menu
set_auto Enable Auto dial-out help Display help
set_auto_hw Defines Auto dial-out trigger quit Leave command mode
Show_config Show serial/TCP configuration