XM1630S Software Reference Manual
No. XM1630S-A00-104
xmodus swiss GmbH
17 / 32
4.3.4 3<cr>
Display Serial/TCP configuration menu
Serial/TCP
===================
up
go to main menu
set_raw_socket <enable/disable> TCP socket is raw, not Telnet
set_iac_rx
<enable/disable> IAC rx filtering
set_iac_tx
<enable/disable> IAC tx stuffing
set_socket_tout Set Telnet session inactivity timeout (min)
set_dialin
<
enable/disable> dial-in (incoming calls)
set_dialin_port Server port number for dial-in
set_esc
<
enable/disable> escape sequence scanning
set_str
Set scanned escape sequence from serial
set_dialout
<enable/disable> dial-out on dial-out IP/port
set_dialout_port Server port number for dial-out
set_dialout_ip
Server IP address for dial-out (outgoing calls)
set_auto
<enable/disable> Automatic dial-out
set_auto_hw
<enable/disable> Dial-out on DTR
show_config
Show serial configuration
save
Save configuration to flash
help
Display menu specific help
quit
Leave
command
mode
4.3.5 4<cr>
Display Input/Output configuration menu
Input/Output menu
===================
up
go to main menu
set_user
Set output mode [0..3] [<d>¦<u>]
get_user
Get output mode [0..3]
set_ddr
Set port type [4..5] [<i>¦<o>]
get_ddr
Get data direction
read_port
Read port input [0..5]
write_port
Set port output [0..5] [0/1]
read_adc
Read ADC input [6..8]
save
Save port setting as default
help
Display menu specific help
quit
Leave
command
mode
4.3.6 5<cr>
Display Administration menu
Admin. menu
===================
up
go to main menu
set_pass
Set user name and password
get_id
Set an identification name
show_config
Show configuration
save
Save configuration to Flash
reject
Reset non-saved changes
restore
Restore factory settings
reset
Reset device
download
Prepare download (WARNING – Flash deleted!)
help
Display menu specific help
quit
Leave
command
mode
