Wireless NVR System User Manual
41
Tips:
If you want to set motion detection recording for other channels, repeat above steps, or click
“Copy to All”.
There are four motion alarm types:
Alarm
: Check Alarm, you
’ll see the prompt error message on monitor when motion is detected.
Buzzer
: Check Buzzer, the NVR will buzz when motion is detected.
Email Notification
: Check Email Notification, you
’ll receive email alerts with snapshots when
motion is detected.
APP Notification
: Check APP Notification, you’ll receive mobile push notifications when motion
is
detected.
For more information about “Area Edit” setting, check here:
http://www.xmarto.com/helpcenter/?/article/5
4.6.4 Alarm-triggered Recording (Sensor Recording)
Function:
Alarm-triggered recording allows the NVR to start recording when any alarm/sensor input
is detected. It works only when NVR is connected with external alarms and sensors.
Operation Steps:
1)
Right click mouse to pop out NVR main menu, then click System setting
–
Record setting
–
Record
Plan.
2)
Set the Channel and Weekday from drop-down menu. Keep the default schedule 1 time period
and check “Sensor”.
3)
Go to “Sensor setup”
, as shown in image 46, select the channel you want to set as
Alarm-
triggered Recording from “Channel” dr
op-down menu, set work Mode a
s “Enable”.
Image 46
