12
Assembly
NOTE
:
Hand tighten bolts and lock
nuts until machine is fully assembled.
Step 12
Apply grease to the barrel of the M10X70mm bolt set (55). Next, attach the leg lever (18) to
the front leg (12) and secure using the bolt set (55). Make sure the barrel of the bolt set (55)
is inserted through both sides of the bracket on the front leg (12).
Note:
Do not overtighten the bolt set; the leg lever must pivot easily.
18
12
55
Grease
Bracket
Figure 12
Step 13
Insert a Foam Roller tube (24) into either hole on the front leg (12). Slide a Foam Roller(23)
onto each end of the Foam roller Tube (24).
Insert a Foam Roller Tube (24) into a hole on the Leg lever (18). Slide a foam Roller (23) onto
each end of the Foam Roller Tube (24). Press a foam roller cap (68) into each end of the tube.
12
23
23
23
23
23
23
68
68
68
68
68
24
24
24
18
