9
Assembly
Step 6
Pull the Pop Pin (45) out as far as it will go and slide the seat carriage (42) onto the Frame (8).
Attach the front leg (12) to the frame (8) using two M8X60mm bolts (59), two M8X65mm bolts
(46), six M8 washers (50), and four M8 lock
nuts (49).
Step 7
Set the pins on the adjustment tube (9) into a set of brackets located on the left and right
uprights (3 & 4).
Pin
3
4
9
Pin
42
8
49
12
59
46
49
50
50
50
50
NOTE
:
Hand tighten bolts and lock
nuts until machine is fully assembled.
Figure 6
Figure 7
