5
Parts Identifier
M8 x 65mm Bolt (46)
M10 x 145mm Bolt (53)
M8 x 70mm Bolt (71)
M10 x 65mm Bolt (30)
M8 x 60mm Bolt (59)
M10 x 60mm Carriage Bolt (29)
M10 x 120mm Bolt (14)
M10 x 70mm Bolt (33)
M10 x 95mm Bolt (64)
M10 x 70mm Bolt Set (55)
Getting Started
- The XMARK Fitness
XMARK Fitness
XMARK Fitness
International Bench requires some assembly. Unpack
the box in a clear area. Remove packing material. Do not dispose of packing material until
assembly is complete and unit is working properly. Place the unit on a clean level surface
for assembly. Before assembling, the unit should be placed as close as possible to its final
location. If you are missing any parts or hardware, please call
at 1-800-719-
4605. Tools have been provided to assist with product assembly.
recommends
that two people assemble the unit.
The included hex key, grease packet, and the following tools (not included) are recommended
for assembly.
Note:
Some hardware may be pre-installed in some parts.
Hex Key (Included)
Two Adjustable Wrenches
Rubber Mallet
Flat Head Screwdriver
Phillips Head Screwdriver
M8 Washer (50)
M6 Washer (54)
M10 Washer (43)
M6 x 20mm
Bolt (41)
M6 x 40mm Bolt (48)
M10 Locknut (58)
M8 Locknut (49)
M4 x 16mm
Screw (57)
Olympic Adapter
Leg Extension
w/ Curl Bar
SafetySpotter
Weight Rest
Adjustable
Tube
Arm Curl Pad
Weight Plate Holder
