XLT Ovens 1832 Скачать руководство пользователя страница 52

Страница: 52 / 114

Technical Support US: 888-443-2751

Technical Support INTL: 316-943-2751

HOOD DESCRIPTION

End Shroud
Panel (size
specific)

Front Shroud
Panel

Main Canopy

VFD Exhaust
Fan Controller

The XLT Hood System consists of three (3) major parts; the Main Canopy, the Shrouds,

and the Variable Frequency Drive (VFD) exhaust fan controller.

The Main Canopy serves to collect and transmit heat to the exhaust fan. It houses filters,

lights, and the controller. The controller operates both the hood and ovens. The main canopy size

is dependent upon oven size.

The Shrouds assist the efficiency of the main canopy by entrapping heat. They are config-

urable for either front or end loading and front or end unloading, and are easily removable for

cleaning and maintenance.

The VFD converts input power to variable frequency three-phase output power to control

the speed of the exhaust fan. All electric utilities for the hood and exhaust fan connect through the

electrical box located on the front of main canopy. The capacitive touch buttons are located on the

Hood User Interface on the front of main canopy, and interlock the function of the hood and ov-

en(s). There are relays that provide interlocks for equipment such as, HVAC dampers, and/or ded-

icated MUA units and there is a optional relay for fire suppression.

All XLT hoods are available pre-piped for fire suppression, allowing for simple, in-field

installations. For fire suppression detailed information see manual XD-9011 Fire Suppression In-

stallation for XLT Hoods and XLT Ovens.

The XLT hood was designed to conform to the requirements of IMC 2015 or current ver-

sion, which is a Type I hood. It was also designed to have optional fire suppression added to meet

requirements of NFPA 96 standard. This was done to allow XLT to better service the requirements

of the customer and the associated jurisdictions.

Conduit Junction Box

Hood User Interface

Fire Suppression
Plumbing (FS)

Содержание 1832



















































































































Результаты поиска

Содержание 1832

Отзывы:

Бренды по названию

Популярные бренды

XLT Ovens 1832, Руководство по установке и эксплуатации

Результаты поиска

Содержание 1832

Отзывы:

Бренды по названию

Популярные бренды