manualshive.com logo in svg

XLT Ovens 1832, Руководство по установке и эксплуатации, Страница: 43 / 114

Поделиться
Скачать
XLT Ovens 1832 Скачать руководство пользователя страница 43

Technical Support  US:  888-443-2751 

Technical Support  INTL:  316-943-2751 

 

43 

 

Your XLT oven is constructed of stainless steel.  Most commercial cleaning agents may be 

used safely on all stainless steel surfaces.  Check application restrictions on product label prior to 
usage.  Observe recommended precautionary and safety measures as dictated by the product manu-
facturer.  Bleach can cause stainless steel to discolor and corrode and is not recommended for 
cleaning.   
 

Do not use caustic cleaners on the conveyor bearings as they will cause irreversible damage 

to the part. 
 

Do not use abrasive cleaners or abrasive pads as they can scratch stainless steel surfaces.  

Areas with heavy buildup should be sprayed and allowed to soak for up to five (5) minutes prior to 
wiping clean.  Always wipe with the “grain” of the surface to maintain appearance. 

 

Do not use caustic cleaners on the control panel and/or electronic components. Only use 

cleaners compatible with Lexan® on the face of the conveyor control. 
 

The most critical item to be cleaned is the filter on the fan.

  

The filter is held in place by the 

stainless steel fan guard/filter mount and can be washed several times.  Regular cleaning of the fil-
ter is important to maintain air circulation within the control box.  Depending upon store condi-
tions, this filter should be cleaned weekly or as it gets clogged with dust.  Please contact XLT for 
replacement parts. 

 

       

Cooling Filter Maintenance

 

1.  When cooling filters need to be cleaned an alarm will appear on the LUI saying “FILTER”. 
2.  Press the MENU button to enter the “FILTER RESET” screen.  
3.  Once the filter is cleaned, press ENTER to reset the filter timer. This will take you to another 

screen which will show you the timer back at 00:00 and will exit after five (5) seconds. 

4.  If you wish to bypass alarm press the MENU button and it will clear the alarm for an additional 

two (2) hours. Then the “FILTER” alarm will appear again. 

OVEN CLEANING 

Fan Guard / Filter Holder 

Fan Filter 

Содержание 1832



















































































































Отзывы:

Нет отзывов