manualshive.com logo in svg

XLT Ovens 1832, Руководство по установке и эксплуатации

Поделиться
Скачать
XLT Ovens 1832 Скачать руководство пользователя страница 20

Technical Support  US:  888-443-2751 

Technical Support  INTL:  316-943-2751 

 

20 

Gas Supply Requirements for All Ovens 

1.  The gas supply shall have a gas meter and regulator large enough to handle 

ALL

 of the gas    

appliances, such as the furnace, water heater, & ovens in operation at the same time. Add up all 
of the Btu/kw/MJ ratings to determine the total load. 

2.  The gas supply shall have a separate gas meter and gas pressure regulator for each occupant.   

Installations in multiple occupancy buildings, (strip malls) shall not share gas meters and regu-
lators with other occupants. 

3.  Gas hose assemblies with quick disconnects for each oven deck will be installed at each valve.  
4.  A sediment trap shall be installed downstream of the equipment shutoff valve as close to the 

inlet of the appliance as practical at the time of appliance installation. The sediment trap shall 
be a tee fitting with a capped nipple in the bottom outlet as illustrated ( Pg. #20), and in accord-
ance with ANSI Z223.1-2012 and NFPA 54-2012 National Fuel Gas Code, section 9.6.7. 

5.  A sediment trap shall be installed on the rear of the oven control box before the gas hose. The 

sediment trap shall be a tee fitting with a capped nipple in the bottom outlet as illustrated ( Pg. 
#20), and in accordance with ANSI Z223.1-2012 and NFPA 54-2012 National Fuel Gas Code, 
section 9.6.7. 

6.  The composition of gases varies greatly from time to time and from place to place. For this rea-

son, the material used for the gas lines shall be steel or malleable iron, not copper. ANSI 
Z83.11-2016 CSA 1.8-2016 Gas Food Service Equipment states: “Copper tubing or semi rigid 
tubing with internal copper layering, whether internally tinned or not, shall not be used for con-
veying gases.” ANSI Z223.1 NFPA 54 National Fuel Gas Code states: “Copper and brass tub-
ing shall not be used if the gas contains more than an average of 0.3 grains of hydrogen sulfide 
per 100 scf of gas (0,7 mg/100L).” 

All installations must conform to local building & mechanical codes. 

NOTE 

Do not use Teflon tape on gas line connections as this can cause gas valve malfunc-
tion or plugging of orifices from shreds of tape.  

OVEN REQUIREMENTS 

CAUTION 

Содержание 1832



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды