10
1
Accessory
2
Retainer
pull out and eurn+/-180
Remarking:
When you removing the accessory, such as a bull point, a cutter etc.., follow above
procedure in reverse order.
Prior to operation
1. Power source
Ensure that the power source to be utilized conforms to the power requirements which
specified on the name plate of the hammer.
2. Power switch
Ensure that the power switch is in the position of OFF. If the plug is connected to power
receptacle while the power switch is in ON position, the demolition hammer will start operation
immediately, which can cause serious accident!
Switch operating
Switch ON
Push to the top as arrow 1 direction; Push back to max. as arrow
2 direction(power source on)
，
then push as arrow 1 direction to
max.(lock switch).
Switch OFF
When press the switch button again, switch is to off positon.
Operation
1. Pull the trigger switch after applying the tip of the bit to crushing position. In some cases, it's
necessary to punch the tip of the bit against the crushing position forcibly in order to begin the
striking stroke. This is not due to malfunction of the power tool. It means that the safe guard
mechanism against no-load striking is working.
2. Operate this demolition hammer by utilizing its own weight. The performance will not be better
if it is pressed or thrust forcibly against the work surface. Hold with a force just sufficient to
4. Operation
